Skip to content
Colorbond granny flat with an antenna under the eave, behind a period home

We bring your home internet out to the granny flat, studio or pool house

We look at your place first, then tell you whether cable or a wireless link suits it.

Your options

  • Mesh. If the flat is close and the walls are light, a mesh unit near the back door can sometimes carry the signal across. It needs a good signal from the house to work.
  • Cat6 cable. A cable from the house to the flat is the most reliable link. It runs in conduit, and a registered cabler does the run. An access point inside gives Wi-Fi.
  • A wireless link. Two small outdoor radios, one on each building, aimed at each other. It's the stand-in for a trench. The link carries the network. An access point inside gives the Wi-Fi.
  • A separate internet service. The flat gets its own service and its own bill. On the same address, that goes through an internet provider, not us. We can set up the Wi-Fi once it's on.

A Wi-Fi extender on the windowsill is the usual first try. It loses speed with each hop, so the flat often still drops out.

What decides which one fits

  • Distance. A short, easy path suits a cable. A longer gap suits a wireless link.
  • Walls. Brick, render, foil insulation and metal window frames block Wi-Fi. Weatherboard lets more through.
  • The gap between the buildings. A wireless link needs the two buildings to see each other. Trees, a shed or a fence in the way change the plan. A cable needs a path we can dig or run.
  • Power. Most radios and access points run off one network cable from a small switch or power injector, and that needs a power point nearby. A new power point is a registered electrician's job.

One network, or two?

Most families want the flat on the home network, so phones and the TV just work. If a tenant lives there, a separate Wi-Fi name on the same internet keeps their devices apart from yours. If you want separate bills, a second internet service is the cleaner answer. We'll talk it through before you choose.

What happens on the day

  • 1. We walk through the house and the flat and check the path between them.
  • 2. He confirms the option and where each piece goes, before anything goes up.
  • 3. We fit the radios or run the cable, then put the access point inside the flat.
  • 4. We set up the Wi-Fi name, then test on your phone in each room of the flat.
  • 5. You get the Wi-Fi details and what to do if it drops out.

Gear we use

TP-Link is our usual pick: Deco mesh and Omada radios and access points. Where it suits the site, or you already have it, we install UniFi. Vin Connect isn't endorsed by TP-Link. Vin Connect isn't affiliated with Ubiquiti.

A job like this: Pearcedale

At Pearcedale we got Wi-Fi out to the shed and the workshop on the same property. A granny flat is the same work, set up for living in.

See the Pearcedale job

Questions

How do I get Wi-Fi to a granny flat?
Carry the home internet to the flat with a Cat6 cable or a wireless link. Then put an access point inside for Wi-Fi in each room.
Will a Wi-Fi extender reach a granny flat?
Sometimes, if the flat is close and the walls are light. An extender loses speed with each hop, so further away it often drops out.
Can a granny flat get its own NBN connection?
Usually not on the same address, because NBN ties each connection to an address. Your internet provider may be able to add a second service. Most people extend the house internet instead.
Can a tenant have their own Wi-Fi?
Yes. We can set up a separate Wi-Fi name on the same internet, so their devices stay apart from yours.
Does the granny flat need power for the link?
Yes. The radio and access point need power at the flat. Most run off one network cable. A new power point is a registered electrician's job.
Does it work with Starlink or NBN?
Yes. We carry whatever internet the house has, Starlink or NBN, out to the flat.

Vin Connect isn't endorsed by TP-Link. Vin Connect isn't affiliated with Ubiquiti, Starlink or SpaceX.